Ridge tile failure is the most common roofing issue across Chichester's Victorian, Edwardian and interwar housing stock. Original mortar bedding from the pre-war period has reached or passed its service life on most properties that have not had recent attention.
The correct mortar specification for ridge re-bedding depends entirely on the property's age and construction. Lime mortar for Victorian and Edwardian clay tile properties. Sand and cement for post-war concrete tile. Full dry-fix systems for modern properties on exposed sites. Getting this wrong — Portland cement on a Victorian clay tile terrace — causes tile edge spalling that defeats the purpose of the repair.
For Victorian and Edwardian properties with clay plain tile roofing, lime-based mortar is the correct ridge bedding specification. Portland cement is too rigid for the differential movement of clay tile roofs and causes edge spalling at the tile-mortar contact. For post-war concrete tile roofs, well-gauged sand and cement at 3:1 is standard. We always specify the mortar to the property, not to the rate.
On south and west-facing ridges, coastal properties, and any position above the general roofline of surrounding buildings, mortar bedding alone is insufficient. Wind uplift on a fully mortar-bedded ridge without mechanical fixing can displace tiles despite visually sound bedding. We specify aluminium ridge clips as supplementary fixing on all exposed ridges as standard.
Hip tiles on hipped roof sections fail for the same reason as ridge tiles and are often overlooked because they are less visible from the street. On Edwardian semis with hipped roofs — common in Stockbridge and Summersdale — hip tile failure is a consistent survey finding. We re-bed hip tiles to the same specification as ridges, with clips on exposed positions.
Free survey — no call-out fee — Bognor Regis & surrounding area
📞 01243 278085Edwardian seafront terraces and post-war residential, direct solent exposure. For ridge repointing in Bognor Regis, this means nail sickness 5-10 years earlier than inland due to salt aerosol, stainless fixings standard. We factor this into our survey, specification and material choice on every Bognor Regis job — not as an afterthought but as the starting point for getting the work right.
"Excellent full ridge re-bed in lime mortar. Free survey, clear quote, arrived on time and cleaned up completely. Exactly what you want."
"Used them for ridge and hip repointing with mechanical clips. Honest assessment, matched materials perfectly, no pressure on scope. Very happy with the result."
"Called for emergency ridge repair after storm displacement after another contractor let me down. Professional from first call to completion. Recommend unreservedly."
Bognor regis faces direct solent exposure with the highest salt aerosol concentration of any town we cover regularly. For roofing work in Bognor Regis, this means Nail sickness appears 5 to 10 years earlier than equivalent inland properties — stainless fixings and patination oil are baseline specification, not upgrades. Seafront and town centre mix of edwardian terraces and post-war residential. We factor all of this into our survey, specification and material choice on every Bognor Regis job.
The volume of emergency calls from Bognor seafront properties after storm events has given us detailed knowledge of which streets, which roof types and which failure modes to expect. This pattern recognition means faster diagnosis and more accurate quotes for Bognor properties across all service types.
Free survey across all Chichester postcodes and the surrounding area. Written quote with full itemised breakdown. No call-out fee, no obligation, and no pressure to commit before you are ready. We have been carrying out this work in Chichester and the surrounding area for over 20 years. Our reputation here is built on honest assessment and correct specification — not on selling work that is not needed. Call 01243 278085 to arrange a free survey.
Costs vary by scope and access. Ridge Repointing (per metre): £40–£70. Full Ridge Re-bed (semi): £600–£1,400. We provide a free survey and written itemised quote for all work in Bognor Regis — no obligation to proceed.
Yes. Bognor Regis is part of our regular working territory. We carry out ridge repointing across all Bognor Regis postcodes and the surrounding area. Our own team on every job — no subcontractors.
No. The survey visit and quote are free with no obligation. For emergency work, we charge only for the make-safe and repair — no separate call-out fee on top.
Minor repair or maintenance visits typically take 2 to 4 hours. Larger jobs — re-roofing, full flat roof replacement — take 3 to 7 days depending on size and complexity. We confirm the programme in the written quote.
Scaffold requirements depend on the job and property height. We confirm access requirements in the written quote. Scaffold cost is always included as a line item so there are no surprises.
Yes. Edwardian seafront terraces and post-war residential, direct solent exposure. For ridge repointing this means nail sickness 5-10 years earlier than inland due to salt aerosol, stainless fixings standard. We specify materials and methods appropriate to Bognor Regis's specific conditions at the survey.
Yes. Our NFRC membership is current and verifiable at nfrc.co.uk. We hold £5m public liability insurance and provide a written 10-year workmanship guarantee on all ridge repointing in Bognor Regis. All credentials available on request.
The mortar specification for ridge re-bedding in Bognor Regis depends on the property's age and construction. In Bognor Regis, where direct Solent exposure and salt aerosol at the UK coast, we encounter both clay plain tile and concrete interlocking tile properties that require different specifications. For Victorian and Edwardian clay tile properties, a lime-based mortar is the correct specification — Portland cement is too rigid for the differential movement of clay tile roofs and causes tile edge spalling within 10 to 15 years. For post-war concrete tile roofs, well-gauged sand and cement at 3:1 is standard. We always specify the mortar to the property, not to whatever is most convenient to mix.
In Bognor Regis, ridge tile security matters beyond mortar bedding alone. Wind uplift on exposed positions — south and west-facing ridges, elevated sites, properties with limited shelter from surrounding buildings — can displace ridge tiles despite visually sound mortar. We specify aluminium ridge clips as supplementary fixing on all exposed ridge positions as standard. Clips lock the ridge tile to the batten independently of the mortar and remain effective even if mortar eventually softens. On coastal and harbour-adjacent properties in the coverage area, we always use clips — the exposure and salt aerosol that accelerates mortar deterioration makes supplementary fixing essential rather than optional.
Ridge repointing in Bognor Regis costs £40 to £70 per metre for partial re-bedding. A full ridge re-bed on a typical semi-detached runs £600 to £1,400 depending on ridge length, access and whether scaffold is required. Hip tile re-bedding on hipped roof properties adds £400 to £900 depending on hip length. All costs confirmed in written quotes after a free survey.
Honest pricing from a local Chichester roofer. Free survey, written quote, no obligation in Bognor Regis.
01243 278085 ✉ Email Us