Ridge tile failure is the most common roofing issue across Chichester's Victorian, Edwardian and interwar housing stock. Original mortar bedding from the pre-war period has reached or passed its service life on most properties that have not had recent attention.
Tell us the job in 30 seconds. No pushy sales, no call-out fee.
📞 Call Now: 01243 278085The correct mortar specification for ridge re-bedding depends entirely on the property's age and construction. Lime mortar for Victorian and Edwardian clay tile properties. Sand and cement for post-war concrete tile. Full dry-fix systems for modern properties on exposed sites. Getting this wrong — Portland cement on a Victorian clay tile terrace — causes tile edge spalling that defeats the purpose of the repair.
For Victorian and Edwardian properties with clay plain tile roofing, lime-based mortar is the correct ridge bedding specification. Portland cement is too rigid for the differential movement of clay tile roofs and causes edge spalling at the tile-mortar contact. For post-war concrete tile roofs, well-gauged sand and cement at 3:1 is standard. We always specify the mortar to the property, not to the rate.
On south and west-facing ridges, coastal properties, and any position above the general roofline of surrounding buildings, mortar bedding alone is insufficient. Wind uplift on a fully mortar-bedded ridge without mechanical fixing can displace tiles despite visually sound bedding. We specify aluminium ridge clips as supplementary fixing on all exposed ridges as standard.
Hip tiles on hipped roof sections fail for the same reason as ridge tiles and are often overlooked because they are less visible from the street. On Edwardian semis with hipped roofs — common in Stockbridge and Summersdale — hip tile failure is a consistent survey finding. We re-bed hip tiles to the same specification as ridges, with clips on exposed positions.
Free survey — no call-out fee — Bosham & surrounding area
📞 01243 278085Tidal harbour village, quayside heritage properties, extreme salt aerosol. For ridge repointing in Bosham, this means lead oxidation rate highest in coverage area, tidal moisture affects all fixing metals. We factor this into our survey, specification and material choice on every Bosham job — not as an afterthought but as the starting point for getting the work right.
"Excellent full ridge re-bed in lime mortar. Free survey, clear quote, arrived on time and cleaned up completely. Exactly what you want."
"Used them for ridge and hip repointing with mechanical clips. Honest assessment, matched materials perfectly, no pressure on scope. Very happy with the result."
"Called for emergency ridge repair after storm displacement after another contractor let me down. Professional from first call to completion. Recommend unreservedly."
Bosham is a tidal harbour village with quayside properties within metres of the water. For roofing work in Bosham, this means Salt aerosol concentration here is the highest in the coverage area — marine-spec lead and patination oil are mandatory on all harbour-edge properties. Conservation area around the quay and the historic church. We factor all of this into our survey, specification and material choice on every Bosham job.
We carry patination oil and marine-spec fixings on all vehicles attending Bosham jobs as standard — not as ordered-in extras. The quayside access constraints are familiar and we plan attendance and material delivery around the tidal schedule when required.
Free survey across all Chichester postcodes and the surrounding area. Written quote with full itemised breakdown. No call-out fee, no obligation, and no pressure to commit before you are ready. We have been carrying out this work in Chichester and the surrounding area for over 20 years. Our reputation here is built on honest assessment and correct specification — not on selling work that is not needed. Call 01243 278085 to arrange a free survey.
Ridge repointing across the Chichester area covers a range of property ages and exposure conditions that require different specifications. Lime mortar for Victorian and Edwardian clay tile properties. Sand and cement for post-war concrete tile. Mechanical clips on all exposed positions. Dry-fix for modern construction on exposed coastal sites. The mortar specification is decided at the survey based on what is correct for the property — not what is most convenient to carry.
Ridge problems in Chichester show as loose or slipped ridge tiles and crumbling mortar along the apex — worst on the exposed coastal and peninsula properties.
When it is not the answer: If the underlying covering is sound and the problem is localised, a targeted repair is the honest answer rather than a larger job. Read the full guide.
We inspect the roof at close range and diagnose the actual issue on your Chichester property.
You receive a written, itemised quote with no call-out fee and no obligation.
We book a time that suits you, with weather margin built in.
We carry out the work in materials matched and correct for the property.
We clear the site and hand over the written 10-year workmanship guarantee.
| Job | Typical duration |
|---|---|
| Minor works | A few hours |
| Typical job | 1 day |
| Larger works | 2–3 days |
Wet or high-wind days can pause work at height — we build weather margin into every Chichester booking.
Access is by tower, ladder or scaffold depending on the job and the property; scaffold is always itemised in the written quote. Scaffold is specified for: any job needing safe standing time at height - always itemised in your written quote, never a hidden extra, and we arrange it.
Bosham's waterside conservation village has narrow lanes, tidal-road access constraints, and listed properties needing conservation-correct work. Pavement scaffold and skip permits go through Chichester District Council; allow a few working days on streets like Bosham Lane, High Street, Shore Road where space is tight.
| Job | Typical range | Notes |
|---|---|---|
| Slipped or cracked tile refix | £150–£250 | Per visit incl. access |
| Lead flashing renewal | £350–£750 | Chimney or abutment |
| Valley lining replacement | £400–£900 | Common on tree-shaded roofs |
| Ridge re-bed (per metre) | £40–£70 | Lime mortar on period stock |
| Chimney repointing | £350–£900 | Per stack, by scope |
Worked example: A rear valley rebuild on a 1930s Summersdale semi: around £680 including tower access and waste removal.
No deposit on repairs under £500. You never pay before the work is done and inspected. Re-roofing over £5,000 is staged — nothing up front before materials are on site. Reduced 5% VAT usually applies to re-roofs; confirmed in writing.
Covering PO18 and surrounding postcodes.
Workmanship is covered for 10 years in writing, with manufacturer warranties on any materials on top.
If a fault appears in covered work, we come back and put it right. No quibbling, no re-charge.
We keep disruption to a minimum, protect the area below the work, and clear everything before we leave. You do not need to stay home for external work - we just need power and access agreed in advance.
Most work runs year-round; temporary weatherproofing goes on the same day if rain interrupts. Bosham's harbour setting brings the highest humidity and salt-driven lead oxidation in the area.
Costs vary by scope and access. Ridge Repointing (per metre): £40–£70. Full Ridge Re-bed (semi): £600–£1,400. We provide a free survey and written itemised quote for all work in Bosham — no obligation to proceed.
Yes. Bosham is part of our regular working territory. We carry out ridge repointing across all Bosham postcodes and the surrounding area. Our own team on every job — no subcontractors.
No. The survey visit and quote are free with no obligation. For emergency work, we charge only for the make-safe and repair — no separate call-out fee on top.
Minor repair or maintenance visits typically take 2 to 4 hours. Larger jobs — re-roofing, full flat roof replacement — take 3 to 7 days depending on size and complexity. We confirm the programme in the written quote.
Scaffold requirements depend on the job and property height. We confirm access requirements in the written quote. Scaffold cost is always included as a line item so there are no surprises.
Yes. Tidal harbour village, quayside heritage properties, extreme salt aerosol. For ridge repointing this means lead oxidation rate highest in coverage area, tidal moisture affects all fixing metals. We specify materials and methods appropriate to Bosham's specific conditions at the survey.
Yes. Our NFRC membership is current and verifiable at nfrc.co.uk. We hold £5m public liability insurance and provide a written 10-year workmanship guarantee on all ridge repointing in Bosham. All credentials available on request.
The mortar specification for ridge re-bedding in Bosham depends on the property's age and construction. In Bosham, where tidal harbour quayside properties with maximum salt aerosol, we encounter both clay plain tile and concrete interlocking tile properties that require different specifications. For Victorian and Edwardian clay tile properties, a lime-based mortar is the correct specification — Portland cement is too rigid for the differential movement of clay tile roofs and causes tile edge spalling within 10 to 15 years. For post-war concrete tile roofs, well-gauged sand and cement at 3:1 is standard. We always specify the mortar to the property, not to whatever is most convenient to mix.
In Bosham, ridge tile security matters beyond mortar bedding alone. Wind uplift on exposed positions — south and west-facing ridges, elevated sites, properties with limited shelter from surrounding buildings — can displace ridge tiles despite visually sound mortar. We specify aluminium ridge clips as supplementary fixing on all exposed ridge positions as standard. Clips lock the ridge tile to the batten independently of the mortar and remain effective even if mortar eventually softens. On coastal and harbour-adjacent properties in the coverage area, we always use clips — the exposure and salt aerosol that accelerates mortar deterioration makes supplementary fixing essential rather than optional.
Ridge repointing in Bosham costs £40 to £70 per metre for partial re-bedding. A full ridge re-bed on a typical semi-detached runs £600 to £1,400 depending on ridge length, access and whether scaffold is required. Hip tile re-bedding on hipped roof properties adds £400 to £900 depending on hip length. All costs confirmed in written quotes after a free survey.
Honest pricing from a local Chichester roofer. Free survey, written quote, no obligation in Bosham.
01243 278085 ✉ Email Us